Suitable for use with Dspiae DSP-AT-TH Clamp Holding Handle.
The Tungsten Drill Bit Set (0.3mm-1.2mm) is suitable for drilling a wide range of materials, including: Hard plastics: ABS, PVC, acrylic, etc. Soft plastics: Polyethylene, polypropylene, nylon, etc. Wood: Hardwood, softwood, plywood, etc. PCB: Printed circuit boards Amber: Amber, beeswax, etc. Rough stones: Jade, agate, etc.
The shank size of the drill bits is 3mm (1/8 inch), which is a common size compatible with most hand drills and drill presses.
Tungsten drill bits are harder and more wear-resistant than HSS drill bits, making them ideal for drilling harder materials like PCB, amber, and rough stones. HSS drill bits are more suitable for drilling softer materials like plastics and wood.
Spiral flute drill bits are more efficient at removing debris from the drilling hole, making them better suited for deeper drilling applications. Straight flute drill bits are more suitable for shallow drilling and for materials that tend to chip or break easily.
Yes, there are a few precautions you should take to ensure safe and effective use of the Tungsten Drill Bit Set (0.3mm-1.2mm): Always wear safety glasses and gloves when drilling. Use a drill press or hand drill with a chuck capable of holding the drill bits securely. Select the appropriate drill bit size for the material you are drilling. Start with a slow drilling speed and gradually increase it as needed. Apply lubrication to the drill bit and the material to reduce friction and heat. Clean the drill bits after each use to prevent corrosion and extend their lifespan.
